shude be on the heater...take off cowling and it shud be held in place by two screws..first check your fuses with a trouble light
How do you replace the heater blower motor resistor on a 1998 gmc serria 1500 p/u
How do you replace a heater core in a 1998 Ford Expedition?"
To access the heater resistor on a 1998 Pontiac Transport, first, disconnect the negative battery cable to ensure safety. Then, remove the lower dashboard panel beneath the glove compartment to gain access to the heater assembly. The heater resistor is typically located near the blower motor; unscrew it from its mounting and disconnect the electrical connector to replace it as needed. Reassemble the panels and reconnect the battery once the replacement is complete.
its located on the passenger side right outside the fire wall (under the hood) just get a new resistor from an auto parts store and replace it. if the resistor is corroded like mine was it could be a pain in the ass...
How do you replace a heater core in a 1998 ford expedition?"
How do I replace the block heater in my 1998 F150 4.6L?
The blower motor resistor is located under the front dash on the passenger side of the truck. It is a fairly simple job to replace...maybe 15 minutes. The blower motor resistor is located under the front dash on the passenger side of the truck. It is a fairly simple job to replace...maybe 15 minutes.
The blower motor resistor circuit board has gone bad. Replace the blower motor resistor. I did Still dont work Try the fuses...Had the same problem and it was a blown fuse.
Blower resistor is under the glove box. It is diamond shaped with 2 screws holding it in.
how do you get to it
You don't have a heater control valve for this truck.......
Bad blower resistor. I just replaced mine.