To replace ball joints on a 2004 Ford Explorer Sport Trac, start by safely lifting and supporting the vehicle, then remove the wheel and brake components to access the suspension. Disconnect the lower control arm from the steering knuckle, and remove any bolts securing the ball joint to the control arm. Use a ball joint separator tool to detach the old ball joint, then press in the new ball joint using a ball joint press. Reassemble the components in reverse order, ensuring everything is torqued to the manufacturer's specifications.
On 2004 ford exp sport trac is 99mph
backseat removal
The only factory engine in a 2004 Ford Explorer Sport Trac is the 4.0 liter Single Over Head Cam , V6 engine which has ( 6 engine cylinders )
yes
it is hard to replace the speaker because the ford explorer needs accessories manufactured by the same manufacturer
how hard is it to replace the blending door
There is no owners manual shown for a 2004 Ford Explorer Sport on Fords website The 2004 Ford Explorer owners manual shows ( fuse # 24 - 15 amp - cigar lighter , OBD II , neutral tow ) The 2004 Ford Explorer Sport Trac which has the fuse panel on the drivers end of the dash where the fuse panel cover is visible with the drivers door open shows ( fuse # 17 - 20 amp - cigar lighter , OBD II )
cost to replace a head gasket
Timing is computer controlled.
You can view the 2004 Ford Explorer Sport Trac Owner Guide online at : www . motorcraft service . com ( no spaces ) Click on Owner Guides The fuse panel diagram is shown in the Owner Guide
The 2002-2004 Ford Explorer (except sport) takes 22" replacement wiper blades on both sides front and a 16" rear. The Sport takes 18" both sides front and a 14" rear.
Yes. I have recently bought one from truxxx.com