take the cover off with + head squrew driver and twist the bulb gently and pull out gently and repeat steps backwereds
To replace your brake light, you need to unscrew the brake cover from the inside of the trunk. Then you will be able to pull the old bulb out and replace it.
your e brake is on honestly, are you really that stupid?
separate
If you mean the brake light in your dashboard, it means that you have your emergency break on while the car is on.
The lamp in the top brake light of a Toyota Highlander can be replaced by the locating the light housing from the trunk. Find the light cover and remove it to access the lights. Replace the bulbs.
with alot of expirience :)
center brake lites came out on 1994 4runners
only toyota could be this stupid and incompetent...
The third brake light on a 2007 Toyota Avalon is replaced by first removing the rear, retaining screws. The wiring harness can then be disconnect and the light bulb removed.
To replace the third brake light on a 2007 Toyota Avalon, first, open the trunk and locate the plastic cover that conceals the brake light assembly. Remove the cover by unscrewing or unclipping it, then disconnect the electrical connector from the old light assembly. Next, remove the old brake light by unscrewing or pulling it out, and install the new light by reversing the process. Finally, reconnect the electrical connector and replace the plastic cover.
Step by step procedure for replacing the high brake light, with pictures. https://picasaweb.google.com/thaalsm/ToyotaAvalonHighBrakeLightReplacement
To replace the brake light bulb on a Toyota Highlander, first, open the rear hatch and locate the brake light assembly. Remove the screws or clips securing the assembly, then gently pull it out. Disconnect the wiring harness and remove the old bulb by twisting it counterclockwise. Insert the new bulb, reconnect the harness, and reassemble the brake light assembly.