answersLogoWhite

0

What else can I help you with?

Related Questions

How do you fix a stuck lifter on a Chevy 305?

If a lifter is stuck in the lifter bore and won't move, it has probably ruined the cam. The procedure would be to install a new cam and lifters.


How do you adjust festiva valves to stop a knocking?

Have the timing checked and adjusted by a mechanic. you may have to replace the lifter valves if they are getting stuck


How much does it cost to replace lifter in Jeep Grand Cherokee?

Labor cost lifter for jeep cherokee


What might cause the motor to tap?

A stuck lifter or loose connecting rod.


How do you fix lifter that stick's when cold but stop's when warm on a 2004 Chevy vortex s10?

You can't fix a bad lifter, replace the bad lifter with a new one.


What could cause a loud tapping noise in a escort engine?

Stuck hydraulic lifter.


How can you tell if a roller lifter is bad?

This is a toughie. First you have to decide which lifter it is then pull the rocker cover and find the rocker arm that has play in it. Then look at the lifter and where the push rod rides should be stuck down further in the lifter bore than the rest. Or press down on the inside and if it goes down over 1/8 inch and is springy the lifter is bad.


How do you replace the hydraulic lifters on a 96 Saturn SL?

how to replace lifter saturn 2002 1.9l sohc


Sticking lifter on v6 GMC sierra?

2003 v6 90000 miles lifter tap for 3-5 min when i frist start it ? Purchase a can of Seafoam Motor Treatment and follow the directions on the can. This will free the stuck lifter. Seafoam helps liquefy gum and varnish deposits helping to quiet noisy valve lifter


How do you replace lifter in 4.0L jeep?

You have to remove the cylinder head to access the lifters.


How fix lifters?

If a lifter is worn out you are not going to fix it, you will want to replace it with a new one.


How do you test lifters in a Chevy 350?

If you have any doubt, replace them. If the engine is running, you can pull a rocker cover and see if you can find a noisly lifter by slipping a thick feeler gauge between the valve and the rocker while the engine is running. If that significantly changes the sound of the noisy lifter, it's probably bad and you should replace it. Once the engine is torn down, just replace any lifter that's suspicious. Many people replace them every time they tear the engine down.