To replace the EGR valve on a 1999 Acura 3.2 TL, first, ensure the engine is cool and disconnect the negative battery terminal. Remove the EGR pipe and the two bolts securing the EGR valve to the intake manifold. Install the new EGR valve, reattach the bolts, and reconnect the EGR pipe. Finally, reconnect the battery terminal and start the engine to check for leaks.
How long can you drive before getting your egr valve repaired on 1999 acura cl?
That's your EGR valve flow is insufficient. Replace the EGR valve.
. unbolt upper intake and remove along with throttle body egr valve hans on electronic pkug on top remove that then unbolt egr vavle from lower intake
$30
I'm Trying To Change The EGR valve ON My 1999 Nissan Quest How Difficult Is It Going To Be, Please Help
To replace the EGR valve on a 2004 Acura MDX, first, disconnect the negative battery terminal and remove any components obstructing access to the EGR valve. Unplug the electrical connector and detach the vacuum lines. Remove the mounting bolts securing the EGR valve and carefully take it out. Install the new EGR valve by reversing the disassembly steps, ensuring all connections are secure, and finally reconnect the battery.
between 250 and 400
I was informed by carl a tech at honaccurate, a reputable shop in boulder,CO that 94 acura integra does not have an EGR valve.
where do I find the egr valve on a 1999 Chevy Cavalier?
This issue is typically caused by a broken or jammed EGR (Exhaust Gas Recirculation Valve). To remedy the problem, you must remove the old EGR valve and replace it. Attached is an Article from AutoZone on how to determine if it is the EGR valve and how to replace the EGR on a Generation 3 (1996-1999) Ford Taurus, It will also determine if your problem lays in other EGR components.
To replace the EGR valve on a 1999 Chevy Malibu, start by disconnecting the negative battery terminal to ensure safety. Remove any components obstructing access to the EGR valve, such as the air intake duct. Unplug the electrical connector and remove the mounting bolts of the EGR valve, then take out the old valve. Install the new EGR valve, secure it with bolts, reconnect the electrical plug, and reassemble any components you removed, finally reconnecting the battery.
the EGR valve is just under the distributor cap