you will have to replace the window regulator.
The window is not off track. The window regulator is broken. In most cases you will have to replace the window motor and regulator as an assembly.
take it to an auto glass shop, it is not that expensive
You must replace the entire regulator.Here's howhttp://www.ricksfreeautorepairadvice.com/repair-topics/window-power-repair/replace-a-power-window-regulator
You need to replace the entire regulator assembly.
I really need to know whats wrong with it, what dosent it do. Most likely you need to replace the window regulator.
To replace the window regulator on a 2002 Toyota Tacoma, first, remove the door panel by unscrewing screws and carefully prying it off. Disconnect the electrical connector and remove the old regulator by unbolting it from the window and the door frame. Install the new regulator by reversing the removal steps, ensuring the window is properly aligned with the regulator. Finally, reattach the door panel, making sure all clips and screws are securely fastened.
You need to replace the power window regulator. Go to 1aauto.com and search for the video showing you how to do this.
Window motor and regulator are found inside of the door panel and may be bolted or riveted in. Should be bolted. Disconnect the window from regulator, take out reg. and motor, then disconnect regulator from motor, reconnect new motor to regulator, reattach those inside of the door, then reconnect the window to the regulator, put it together and see if it works.
It is best to replace entire regulator as one unit. Remove door panel. Remove bottom nut of regulator, and remove two top nuts of regulator. Loosen two bolts on bracket holding window. Support window, and carefully remove regulator as one unit.
you can
To replace the driver's side rear window of a 2002 Kia Spectra, start by removing the door panel. This typically involves unscrewing screws and gently prying off the panel clips. Once the panel is off, disconnect the window regulator and any wiring connected to the window. Finally, carefully remove the broken glass and install the new window by securing it in place, reconnecting the regulator, and reassembling the door panel.