To reset the Brake Lamp Light on an Acura, first ensure that the brake fluid level is adequate and that there are no issues with the brake system. Turn the ignition to the "ON" position without starting the engine. Then, press the gas pedal three times within five seconds. This should reset the Brake Lamp Light; if it remains on, check for any underlying issues with the brake system.
The brake light failure sensor on a 1997 Acura 2.2 cl is located on the rear of the car. It is on the back of the left rear lamp assembly.
The 1991 Acura Integra brake lamp number is 2057. See sources and related links below for a picture and more information.
To fix the brake lamp on an Acura CL, first, check the brake light bulb by removing the taillight assembly. If the bulb is burnt out, replace it with a new one of the correct type. Additionally, inspect the fuse related to the brake lights for any damage; replace it if necessary. If the problem persists, check the brake light switch located near the brake pedal for proper function.
Pressure is low for some reason-check your fluid.
the 1989 Honda accord lxi has a brake lamp light on the dashboard, if the brake lamp light is on, this means you have a brake/tail light out or disconnected
If it still doesn't burn, check the ground of the light assy.
The brake lamp indicator on a 2001 Acura CL typically signifies an issue with the vehicle's brake light system. This could be due to a burnt-out brake light bulb, a malfunctioning brake switch, or a problem with the wiring. It's important to check the brake lights to ensure they are functioning correctly, as this is crucial for safety. If the issue persists after checking the bulbs, it may be advisable to consult a mechanic for further diagnosis.
Check BRAKE fluid level. Or is it a "tail lamp" warning? Y-THINK-Y
It means one of the brake lamp bulbs is blown or maybe there's a wiring problem. In any case, your brake lights are not fully functional.
replace the burnt out bulb
On a 1994 Honda Accord, the brake lamp comes on when a tail light is no longer working. The burned-out bulb needs to be replaced. The brake lamp will not come on after the bulb is replaced.
No model year given... Here's the general Acura CL brake light bulb lamp replacement procedure: Purchase the correct replacement brake light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement brake light bulb information. Then consult your owner's manual for the replacement procedure. As simple as it sounds, the owner's manual is the best place to start for brake light bulb lamp replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).