To switch on the fog lights in a Peugeot 206, first ensure that your vehicle is in the "on" position. Then, locate the fog light switch, which is usually found on the right stalk of the steering wheel or on the dashboard. Turn the switch to the appropriate position, typically indicated by a symbol of a lamp with horizontal lines. Remember that the fog lights can only be used in specific conditions, such as fog or heavy rain.
In the Peugeot 206 LX, the switch for the rear fog light is typically located on the dashboard, near the headlight controls. It usually resembles a round dial or a small button with a fog light symbol on it. You may need to turn the headlight switch to the "on" position before activating the rear fog light. Check your vehicle’s manual for specific details, as the layout can vary by model year.
In a Peugeot 206 SW, the fog light switch is typically located on the stalk that controls the headlights, positioned to the right of the steering wheel. You can activate the fog lights by pulling the stalk towards you or pushing it away, depending on the specific model year. Ensure that the headlights are on for the fog lights to function.
The fog light switch is on the end of the turn signal switch. Just pull the end of the turn signal switch and the fog lights will come on. (Turn signal switch and fog light switch are one assembly)
In a Peugeot 206, the fog light button is typically located on the left-hand side of the dashboard, near the headlight controls. It may be marked with a fog light symbol, which resembles a lamp beam with lines emanating from it. If equipped, the front fog light button will usually be a pull or push type switch integrated with the headlight control. Always refer to the vehicle's owner manual for precise details specific to your model.
pull out the light switch
On the turnsignal/light switch lever, on the same turn ring switch as rear fog light. If not you got change it to one with it.
The fog light switch on my peugeot 106 is next too the hazard warning switch and the rear window heater switch below the stereo.
PULL the light switch out (must be in lowbeam setting for fog lights to work)
fog light relay is in the headlight switch durangos are known for this part going bad
pull out light switch
With main switch light just pull
Pull out on the headlight switch, and then press the fog light switch button in.