Remove the retaining ring at the top of your 1985 Chevy ignition switch. Slide the ignition switch out and remove the wiring harness. Reverse the process to install the new ignition switch.
The 1985 Chevrolet El Camino ignition switch can be removed by loosening the retaining ring at the top of the switch. The switch will slide out. Remove the wiring harness from the back of the ignition switch.
i have 85 cavalier how you get key cycliner out
I am having the same problem I was thinking more ignition switch, but like your idea more
It doesn't have a headlamp fuse. They have a circuit breaker built into the headlamp switch.
How to drill out ignition switch on 1985 ford f150?
The payload for the 1985 Chevy S10 pickup is between 1000 and 1500 pounds depending on the exact model. The S10 is the smallest of the Chevrolet pickup series.
If you are talking about the ign switch and not key switch. It is located under the dash, mounted on top the steering column
The ignition is not fused.
The vacuum line diagram on a 1985 Chevy Pickup can be found in the service manual. It details not only the location of each line, but its function as well.
there is a switch either under the shifter or on the side of the trans that activates the lights when you put it in R. It needs adjustment or replacement
You asking about a Corvette or S-10 pickup?
first i would check your coil, if its good, check your ignition switch.