0
What else can I help you with?
How can you test the ignition modual?
ignition module on what?
Were is spark control module at on 89 Chevy van?
The spark control module on a 1989 Chevrolet model van is located in the distributor. To check its life, one must remove the distributor cap and unplug the center coil wire. Replace with a clean, brand new spark plug, and test the van's ignition.
How do you test the ignition module on a 91 merc capri. Auto Zone and Napa could not test.?
Answer testing ignition modulenot all part stores have the ability to test ignition modules,a sure sign would be discoloration of the module or if the outside of the module has a softness to it if neither is apparent you could go to advance auto stores and they do have a peice of equipment to test your module, I used to work at a advance auto parts store
How can you test a ignition module for a 88 gmc pickup?
Remove it and bring it to a NAPA store. They will test it free.
How do you know if a Honda Civic ignition module is bad?
Take it to AutoZone, and they can test it
How do you test the ignition module on a 1992 Toyota Camry?
start the engine if it runs its good
How do you test an Ignition Module on a 2.5 L Chevy Celebrity?
I take mine to Autozone, they offer free testing of ignition modules.
How do you test 1995 cadillac devile 4.6 ignition module?
take it off and take it to autozone they will check/test it for free
How do you test a ignition module on 1992 Honda civic?
Many autopart stores have a machine to test it. The machines use a universal adapter to hook into the ignition control module. The ignition control module is in the distributor. If you mean the part that contains the ignition coil, when mine went bad I probed it with an ohmeter and then asked the parts store if I could test the resistances in a new coil before I bought it. Since the resistances of certain terminals weren't even close, I knew I had a bad coil.
Where is the ignition control module located on a 1992 Chevy S-10 Pickup?
The Distributer module on "92" S-10 Vin code "W" or "Z" is located on the distributer,you must remove the distributer cap to gain access to the ignition module. Once you have gained access to the ignition rotor it is always necessary to always test the module before replacing it.
Would like info on ignition troubleshooting for 92 Chevy Suburban?
test ignition coil,ignition module,pick-up coil,electronic spark control,and knock sensor
How do you replace the ignition module 1990 ford bronco?
To replace the ignition module on a 1990 Ford Bronco, first disconnect the negative battery cable to ensure safety. Locate the ignition module, which is typically mounted on or near the distributor; remove the screws or bolts securing it. Disconnect the wiring harness from the module, then install the new module by reversing the removal process, ensuring all connections are secure. Finally, reconnect the battery and test the ignition system to ensure proper functionality.
