Sit in the driver's seat. Put your seat belt on. With the key in the off position, press and hold in the odometer reset button. Turn the key one click (keep holding the odometer reset button in). Very shortly afterwards you will get a "RESET" (or similar) display. Release the odometer reset button. The display "RESET" will blink. While blinking press the odometer reset button again. That should do it.
The check engine light on a BMW 525i is reset by pressing the trip reset button until the engine icon appears. The Check and DC buttons are used to navigate between menus and the trip button held to actual reset the selected error.
When a check engine light comes on the driver needs to fix the problem for the cause of the light to come on. If the light stays on, then need to perform The Stomp Test.
How do you reset the oil service warning light manually on a 2003 BMW 525i?
Where the fusebox is!
How do you manually reset the oil life monitor on a BMW 525i
how can i reset rear brake pad warning light on 2006 bmw 525i
On the top of engine in a casing in the front of the engine
No, the 1995 BMW has a M50B25 engine, which is basically totally different from the older 1989 BMW which has a M20B25 engine.
no ! i have not seen one yet
The light is reset with a smallish BMW or aftermarket device that can be purchased relatively inexpensively. On Ebay, for example. There's a port it plugs into under the hood, then follow the device's printed instructions, which is, push a button, basically. Very easy. Get on with your bad self in that Bimmer.
The 1990 325i has a M20B25 motor. The earlier 1990 525i had the same motor, a M20B25, whereas the later 1990 525i had a M50B25.
its a 6 with a 2.5 liter engine.