answersLogoWhite

0

The check engine light on a BMW 525i is reset by pressing the trip reset button until the engine icon appears. The Check and DC buttons are used to navigate between menus and the trip button held to actual reset the selected error.

User Avatar

Wiki User

11y ago

What else can I help you with?

Related Questions

How do you reset check engine light on 2005 525i BMW?

When a check engine light comes on the driver needs to fix the problem for the cause of the light to come on. If the light stays on, then need to perform The Stomp Test.


How do you reset brake light on 2006 BMW 525i?

how can i reset rear brake pad warning light on 2006 bmw 525i


How do you reset the oil service warning light manually on a 2003 BMW 525i?

How do you reset the oil service warning light manually on a 2003 BMW 525i?


How do you reset oil service light on 525i 2001?

You need two special BMW reset tools.


How do you reset the brake lining light on a 1995 BMW 525i?

To reset the brake lining light on a 1995 BMW 525i, first ensure that the brake pad wear sensor has been replaced if it was faulty. Next, turn the ignition to the "on" position without starting the engine. Then, press the trip odometer reset button and hold it while turning the ignition off and back on again. Release the button, and the brake lining light should reset.


How do you reset BMW 525i 2007 brake light?

You will need a compatible BMW scan tool to reset this service light from the I drive system.


How do you reset brake fluid light BMW 2007 525i?

You will need a compatible BMW scan tool to reset this service light from the I drive system.


How do you reset the radio in a 1992 BMW 525i?

In order to reset the radio in a 1992 BMW 525i, you will need a five digit code from the manufacturer. Once you receive the code, you can check your user manual for the correct sequence to reset the radio.


How do you reset the oil service light manually on a 2003 BMW 325XI?

How do you manually reset the oil life monitor on a BMW 525i


How do you reset the service light on a 2002 BMW 525i?

http://www.unofficialbmw.com/e36/electrical/e36_reset_service_lights.html Here lies your answer


How do you turn off check engine oil light off on 2003 BMW 525i?

Sit in the driver's seat. Put your seat belt on. With the key in the off position, press and hold in the odometer reset button. Turn the key one click (keep holding the odometer reset button in). Very shortly afterwards you will get a "RESET" (or similar) display. Release the odometer reset button. The display "RESET" will blink. While blinking press the odometer reset button again. That should do it.


How do you reset the increased emission light on 2004 525i BMW?

To reset the increased emission light on a 2004 BMW 525i, you typically need to use an OBD-II scanner to clear the diagnostic trouble codes (DTCs). Alternatively, you can disconnect the battery for about 15 minutes, then reconnect it, which may also reset the light. However, it’s essential to first address any underlying issues that triggered the warning light before resetting it. Always consult your owner's manual or a professional if you're unsure.