You don't. The idle speed is determined by the on board computer and the idle speed control (ISC).
To adjust the idle on a 1996 Ford Aspire, first ensure the engine is at operating temperature. Locate the idle air control (IAC) valve near the throttle body, and check for any vacuum leaks or issues that could affect idle speed. If adjustment is needed, turn the idle speed adjustment screw on the throttle body clockwise to increase the idle speed and counterclockwise to decrease it. After making adjustments, confirm that the idle is stable and within the manufacturer's specified range.
The 1995 Ford Aspire would have a rough idle cut off of power at high speeds due to mis firing. There is also a rev limiter to control how fast you can go.
At idle it should be 13-20 psiWith key on engine off it should be 23-31 psi
Hey JustinThe idle speed is controled by the ecm and is not adjustable. Goodluck, Joe You can adjust the idle air screw. Get a haynes manual it will show you how
Idle speed is computer controlled and is not adjustable.
Idle speed control or Idle air control.
The fast idle-speed on a 1994 Nissan D21 pickup is adjusted by turning the screw on the side of the throttle body. It increases the speed of the engine when the vehicle is idle before completely warming up.
You cant. The idle is controlled by the ecu.
The idle speed is computer controlled
where is the idle control motor for a 1998 ford escort
the TPS (throttle position sensor) controls the idle.
The fast idle-speed on a 1994 Nissan D21 pickup is adjusted by turning the screw on the side of the throttle body. It increases the speed of the engine when the vehicle is idle before completely warming up.