To turn off the turntable on an Advantium SCA1001KSS microwave, press the "Turntable On/Off" button, which is typically located on the control panel. If your model does not have a dedicated button, you may need to consult the user manual for specific instructions. In some cases, you can achieve this by adjusting the cooking settings or using the control dial. Always ensure to follow safety guidelines when operating the microwave.
a turntable is well its in its name a table that u can turn ;P
When the door of a turntable microwave is opened, the turntable typically stops rotating. Most microwaves are designed with safety mechanisms that deactivate the microwave’s functions, including the turntable, when the door is opened to prevent any risk of exposure to microwave radiation. Therefore, you will not see the turntable turn while the door is ajar.
Surely the problem is more elaborate than that... Simply place the dishpan on a turntable (a flat platform that is mounted to a shaft and is able to turn on bearings), connect a pulley to the shaft of the turntable and connect a belt to a motor that will turn the turntable... then the dishpan will turn.
To turn on your Ion turntable, locate the power switch on the back or side of the turntable and flip it to the "on" position. Ensure that the turntable is plugged into a power source before turning it on. This should activate the turntable and allow you to start using it.
This microwave does have a turntable which is 13.5 inches in diameter. It even allows you to turn the turntable on and off as needed for dishes that are over-sized and cannot rotate freely in the microwave.
The turntable turns clockwise.
A T.V turntable assist one ability to view the television from multiple angles. The turn table allows one to turn the television so that they might enjoy viewing from where they are most comfortable.
Most turn tables have speaker plugs.
sharp carousel r 3a55 turntable will not turn
Turntable RepairHow to remove your turntable from your console:If there are no obvious screws attaching the turntable unit to the furniture or cabinet you may need to remove the back piece of the cabinet which is usually a thinner price of ply-board. Upon removing the ply-board their should be some screws attaching the turn table from the inside that can be disconnected using an average philips head screw driver.
"The Crosley CD Recorder is a simple way to turn your old albums and records into CD's. It is styled after an old-fashioned turntable/radio and has a 3-speed turntable, CD player/recorder and AM/FM radio."
you need to attach a wire to the steel frame of the turn table, maybe a screw that's into metal not plastic on the frame of body of the turntable. then connect the wire to the ground terminal on your amp, the terminal should be marked.