Most turn tables have speaker plugs.
You need a receiver to control all the options in your home theater. The receiver is your main unit that will directly send signals to the speakers for their best performance!
Regular passive (non-amplified) speakers will need to be connected to a power amp (an old stereo receiver can do this). Connect the line out of the computer to the aux or tape in of the receiver, and then connect speaker cables from the receiver to each of the speakers.
The receiver is the amplifier for all the speakers, except usually the sub, which is most common with its own amplifier.
Yes they do make wireless surround sound. If you purchase wireless receiver box you will have speakers that are in the front (which doesn't need to be wireless since it's connected to you TV) and you have the right and left which rest behind you. The wireless receiver box connects to a power outlet and sends the single to the two rear speakers. This setup eliminates running speaker wires from the receiver to your speakers.
No, the speaker has a negative and positive port, they both need to be plugged into for it to work. if they aren't, then the speaker will not create sound
You need some vinyl to go with your turntable.After that you just need an amp(or receiver) and some speakers.
You need a receiver to control all the options in your home theater. The receiver is your main unit that will directly send signals to the speakers for their best performance!
You do not receive a receiver to hook up speakers to your tv. An jack that contains the speaker to your TV is all that you need.
Regular passive (non-amplified) speakers will need to be connected to a power amp (an old stereo receiver can do this). Connect the line out of the computer to the aux or tape in of the receiver, and then connect speaker cables from the receiver to each of the speakers.
The receiver is the amplifier for all the speakers, except usually the sub, which is most common with its own amplifier.
You need a phono stage for your turntable so you can call Walmart and get a real stereo.
That depends. If they're computer speakers and all your wires are headphone-jack style, then all you do is run the headphone wire from your speakers and plug it into your computer speaker input on the sound card, or a headphone jack. If they're not computer speakers and you want to wire component speakers through your computer, you'll need a receiver to power them, speaker wire to go from your speakers to the receiver, and a cable to go from your receiver "input jack" to your computer. That cable should have a red and white RCA on one end, and a headpone jack on the other.
That receiver almost definitely does not have a "phono" input. This is a special input that was on older receivers that provided much more amplification than a "CD", "Tape", or "AUX" input. It also applied special "RIAA Equalization" to the signal so that the records would sound right. You need to buy a "phono pre-amp" in order to connect your turntable to your receiver. They are available at most audio/video stores. You simply plug the turntable into the into the pre-amp's input and then connect the pre-amp's output to an unused input on your receiver (eg. "CD", "Tape in" or "AUX").
I wanted to put a new receiver in but i need the speaker wires to be plugged into the wiring harness and i cannot find them. i can find them by the speakers, but the do not go to the receiver...why is this? and where are they
Yes they do make wireless surround sound. If you purchase wireless receiver box you will have speakers that are in the front (which doesn't need to be wireless since it's connected to you TV) and you have the right and left which rest behind you. The wireless receiver box connects to a power outlet and sends the single to the two rear speakers. This setup eliminates running speaker wires from the receiver to your speakers.
You need a receiver with an HDMI output, such as the Sony STRD series of receivers. Your '5.1 Surround System' sounds either like a surround speaker set with no amplifier, or a system designed for computers. The Sony receivers will amplify passive (non-powered) speakers, but the subwoofer will need to be powered. You will then need to purchase a DVD or Blu-Ray player with an HDMI output. Alternately, you can purchase a Blu-Ray Home Theatre system, which includes the BluRay player and receiver (1 unit), and matching speakers. The Sony BDVE systems are a good place to start.
Nope.