0
What else can I help you with?
Can 4x4 rear end off a Nissan bolt on to a 4x2 Nissan'?
no the drive shafts are different as the transmissions are,its a no go.
How much would petrol cost per mile for a 1 liter Nissan micra?
I have a 1L Nissan Micra (M reg) and town driving is around 35mpg and long distance is around 55mpg - however, to achieve 55mpg I drive at 56mph on the motorway to save fuel. I hope this answers your question!
Can a 2002 jeep be towed on a dolly?
Only with drive shafts removed.Only with drive shafts removed.
What things have an universal joint in it?
Drive shafts, PTO shafts, Steering shafts, Axle shafts,
How do you replace ball joints on 1995 Nissan truck?
how to replace lower ball joints on 1995 4 wheel drive Nissan truck
Do you have to disconnect the drive shafts to replace the clutch and pressure plate 0f a 1989 Mazda 626 5 speed?
yes, u need to disconnect drive shafts to enable you to remove trans mission to get at cluth and pressure plate
How do you change a clutch on a Nissan Micra?
Remove airbox, drive shafts, all connectors onto gearbox, gear selector rod, battery and battery tray, starter motor and then all bolts securing the gearbox. Remove gearbos, and then remove the bolts securing the clutch. Fit new clutch making sure you allign the clutch plate. Refit everything in reverse.
Do you have to change the drive shaft when you replace the drive shaft oil seal on a 2006 Nissan navara?
No you do not.
How do you replace the clutch in a Nissan primera?
without sounding sarcastic you'd remove the old and replace with a new unit. i.e remove wheels, drop off bottom arms, remove drive shafts, gearbox (drain oil first) and then hey presto its there. step by step would be a haynes manual but if your competent and have a few tools do it on your drive with a few cups of tea.
How long does it take to replace the drive shafts in a 1992 Nissan Stanza?
Replacing the drive shafts in a 1992 Nissan Stanza typically takes around 3 to 5 hours, depending on the mechanic's experience and the tools available. This process involves lifting the vehicle, removing the wheels, and disconnecting various components, which can vary in complexity. If done by a professional, the time may be on the shorter end, while a DIY approach could take longer. Always ensure to follow safety precautions and consult a service manual for specific instructions.
Where do you find universal joints in cars?
Drive shafts & axle shafts
How do drive shafts break?
There are a number of reasons that drive shafts break. One reason drive shafts break is because of improper or no lubrication. Another way could be that the U-joint breaks or gets worn out.
