An intake valve typically opens between 0.3 to 0.6 inches (7.6 to 15.2 mm) in most internal combustion engines, though this can vary based on engine design, performance specifications, and tuning. The exact lift is influenced by factors such as camshaft design and engine RPM. In high-performance engines, intake valves may open even further to optimize airflow and boost power.
I nee to know when when to adjut each valve when intake is open and when exhaust ect. I need to know when when to adjut each valve when intake is open and when exhaust ect. I need to know when when to adjut each valve when intake is open and when exhaust ect.
the clearance of intake valve as far as i know is .18 in.
A intake valve open when the piston reaches the top of the cylinder and just after the exhaust valve closes. It allow fuel and air to enter the engine cylinder.
intake valve is bigger.
At 3000 rpm (revolutions per minute), each intake valve would open and close 1500 times in one minute. This is because the intake valve opens once for every two revolutions of the engine, so at 3000 rpm, each valve would open 1500 times.
An intake valve is larger.
Normally from an engine backfire. The plug fires when the intake valve is partially open which will explode the fuel in the intake and carb.
.005- open-intake and exhaust..
The bigger valve is the intake.
Starting at the beginning, Leaky petcock, carb floats stuck open or incorrectly set, fuel running into the intake past the open intake valve or past a closed intake valve with a bad seat, then leaking past the rings on the piston into the crankcase.
Valve overlap.
To open and close a passage. Whether it is intake, exhaust, EGR, pcv, etc.