To fit the speedo cable on a Vauxhall Frontera, first, ensure the vehicle is safely lifted and secured. Remove the speedometer from the dashboard to access the cable connection. Then, disconnect the old cable from the transmission and replace it with the new one, ensuring it's properly seated at both ends. Finally, reattach the speedometer and check for proper operation.
Most probable cause is the drive cable between gearbox and speedo has broken.
speedo connected to gearbox and connected to other end not brken but not working
mine is a p reg and is electric hope that helps
No, it is all electronic. A sensor, with a driven gear will be attached to the gearbox, this will send a signal via wires to the clocks.
Pull the speedo and gauge package out of dash. Unhook wiring. Remove speedo cable from speedometer. Pull speedo cable out of housing, lube it lightly and re-insert. Hook everything back up and re-install gauges. Pull the speedo and gauge package out of dash. Unhook wiring. Remove speedo cable from speedometer. Pull speedo cable out of housing, lube it lightly and re-insert. Hook everything back up and re-install gauges. Pull the speedo and gauge package out of dash. Unhook wiring. Remove speedo cable from speedometer. Pull speedo cable out of housing, lube it lightly and re-insert. Hook everything back up and re-install gauges. Remove gauge package. Remove wires and speedo cable housing. Pull speedo cable out, lightly lube with grease and re-insert. Hook everything back up and re-install gauge packege.
all you have to do is unscrew the cable from the top of your transmission, then from behind tbe actuall speedo
It don't have a cable. It is electronic controlled.
Electronic, no cable.
To remove the speedo cable from a Ford Laser (KH model), first ensure the vehicle is off and safely secured. Locate the speedo cable at the back of the instrument cluster and gently pull it out. Next, trace the cable to the transmission, where it connects; there, you may need to unscrew or unclip it depending on the setup. Once detached from both ends, you can fully remove the speedo cable.
how do you fix a vauxhall astra hand break cable
they don't have speedo "cables". their all electric.
you can buy a tool made for lubricating cables, at a motorcycle shop then u need to disconnect the cable from back of speedo, use the tool and lubricant then reintall cable to speedo usually tho if a speedo cable gets noisy it is worn out and about to break