Take out the old BCM and replaced with a used one with similar number. It worked for me in Chevy Mailbu. It costed me only $20 whereas dealer was asking $800. My car worked after spending $20 for BCM module from Junk Yard. Ensure you take old BCM module and match the number
just make a long story short replace the BCM or BOdy Control Module just as easy as pie. ;-)
just make a long story short replace the BCM or BOdy Control Module just as easy as pie. ;-)
turn the ignition key on
How long does it take to replace my broken dentures?
To replace the Body Control Module (BCM) in a 2000 Cadillac DeVille, first disconnect the negative battery cable to prevent electrical shorts. Remove the trim panels to access the BCM, typically located under the driver's side dashboard. Disconnect the connectors from the old BCM, remove it from the mounting bracket, and install the new BCM by reversing the process. Finally, reconnect the battery and ensure the new module is programmed if necessary.
how long does it take to replace a carburetor on a chevy truck?
To replace the body control module (BCM) in a 2000 Cadillac Deville DTS, first disconnect the negative battery cable to ensure safety. Next, locate the BCM, which is typically found under the dashboard or behind the driver's side kick panel. Carefully remove the mounting screws, disconnect the wiring harnesses, and take out the old module. Install the new BCM by reversing the removal steps, reconnecting the wiring, and securing it in place, then reconnect the battery and reprogram the BCM if necessary.
To replace the body control module (BCM) on a Chevy Avalanche, first disconnect the negative battery cable to prevent any electrical shorts. Remove the necessary trim panels to access the BCM, typically located under the driver's side dashboard. Unplug the connectors from the old BCM, remove it from its mounting position, and install the new BCM by reversing the removal steps. Finally, reconnect the battery, and ensure to reprogram the new BCM if required for proper vehicle operation.
under dash left side bolt to firewall with bracket tcm and seperate bcm boxes
To remove the BCM (Body Control Module) from a 1999 Concorde, first disconnect the negative battery terminal to prevent electrical shorts. Then, locate the BCM, typically found under the dashboard or near the driver's side. Remove any screws or bolts securing the BCM, disconnect the wiring harnesses, and carefully pull the module out of its bracket. Finally, replace it with the new BCM, reconnect the wiring, and secure it in place.
The Body Control Module (BCM) on a 2002 PT Cruiser is typically located under the dashboard on the driver's side. You may need to remove the lower dash panel to access it. The BCM is usually mounted on or near the fuse box. Always ensure the vehicle is turned off and the battery is disconnected before attempting to access or replace the BCM.