approx. 4 - 6 hrs peace
How many hours does it take to take out and replace a transmission on a commercial tractor as a Mack? And what would be the average price?
Typically, an experienced technician will take 2 to 3 hours to replace the ball joints. Alignment will take an hour and transmission flush will take less than an hour.
6 hours
anywhere from 3-5hrs. You have drop the transmission.
Replacing the transmission in a 2003 Chevy Tahoe with a 5.7L V8 typically requires about 10 to 15 labor hours, depending on the mechanic's experience and the specific conditions of the vehicle. This estimate includes time for removing the old transmission, installing the new one, and any necessary adjustments or fluid changes. It’s advisable to consult with a professional for a more accurate assessment based on the specific situation.
2 hours
It will take and experience mechanic six hours to replace your 1996 Chevy truck flywheel. A novice mechanic will take several more hours.
With proper tools and knowledge, 4 hours, 5 hours if it has ac.
about 6 hours
A good mechanic with a vehicle lift and transmission hoist, etc that has done it a few times will take about 8 hours. The home mechanic, all weekend. The engine and transmission come out the bottom together in a cradle/frame, then you can separate them. The van has to be lifted high enough (3+ feet) to get the engine out the bottom.
The fast way.....1.5 hours by cutting out a access door and then resealing it. The correct way......3.0 hours to remove the complete inner fender.......
It will take an experience mechanic approximately 8 hours to replace the timing belt in your 1992 Chevy Corsica. The 1992 Chevy Corsica does not have each timing chain, it has a timing belt.