it depends on where it is leaking from. if its leaking from the seal in the middle, or the "pumpkin" then it shouldn't be overly expensive. because you just have to drain it, replace the seal, put it back together an refill it. if its coming out of the end of the axle then its more complicated... you have to remove the wheel, brake assembly, an then pull the axle out to replace the seal. then put it back together. either way the most expensive part is gonna be the labor. an that depends on the shop. if its leaking from the middle it should take 2 hours for a rookie mechanic. TOPS! if its out of the end... hard saying...
I replaced mine on a 2001 XL 5.3 and the pump cost me $160 new. I paid $100 labor.
The front axle on a 2001 Dodge Durango will cost about $100. Labor averages about $80 to $100 an hour for about 4 hours. Additional parts might be tie rods and ball joints for another $200. The total might be $800 or more after taxes.
How much it cost other fix a trans axle on plymouth voyager
It will cost approximately $90 to replace the axle seal on your Nissan Pathfinder. The axle seal will cost approximately $30 and require one hour of labor to install.
We just purchased a rear axle and the cost was $300.00. That does not include repairing, just part.
$20 to $400, just depends.
Contact the dealership. It might cost you a pretty penny though.
$27,000
Most automobile axles can be straightened. The cost to straighten the automobile axle can cost more than a replacement axle.
If you can do the work yourself, it will cost you around $100 to replace a Yukon water pump. If you take it to a service center, it will cost at least $200 more.
Depends on why it is leaking.
if u have to ask .....