answersLogoWhite

0

What else can I help you with?

Related Questions

How much space should their be between the drivers chest and the center of the steering wheel in a vehicle equipped with an airbag?

it should be 5inches between a driver and steering wheel


In car equipped with airbag how much space between chest and steering wheel?

12-15 inches


In vehicles equipped with an airbag how much space should there be between the driver's chest and the center of the steering wheel?

12-15 inches


How do you remove 1999 holden commadore drivers airbag steering wheel?

To remove the driver's steering wheel airbag on a 1999 Holden Commodore you will need a special set of tools to remove the 4 to 6 security screws that are holding it in. If the vehicle came equipped with a airbag, it needs to have one to remain road safe.


Why should you use a safety belt if the vehicle is equipped with an airbag?

Additional protection.


Airbag rotary coupler how it works?

An airbag rotary coupler, also known as a clock spring, is a crucial component in vehicles equipped with airbags. It allows for the continuous electrical connection between the airbag system and the vehicle's wiring harness while enabling the steering wheel to rotate freely. The coupler consists of several turns of flat, flexible wire coiled inside a housing, which unwinds and rewinds as the steering wheel turns. This design ensures that the airbag can deploy in the event of a collision without losing electrical connectivity.


How do you remove the steering wheel off your 1994 mercury tracer?

4 bolts are romoved from the backsode of the steering wheel. If airbag equipped remove airbag fuse first. Then remove airbag/ horn/ center assembly. Remove large nut from center of wheel, then pull wheel with steering wheel puller.


Can a 2000 Chevrolet S-10 Blazer steering wheel and airbag be replaced with an aftermarket steering wheel and no airbag?

No, it is illegal to remove the SRS from any vehicle you drive on public roads.


How do disassemble the airbag after removing steering wheel on pajero GDI?

To disassemble the airbag after removing the steering wheel on a Pajero GDI, first ensure the vehicle's battery is disconnected to prevent accidental deployment. Next, locate and remove the screws or clips that secure the airbag module to the steering wheel. Carefully disconnect the wiring harness from the airbag, taking care not to damage any components, and then remove the airbag module from the steering wheel. Always follow safety protocols and consult the vehicle's service manual for specific instructions.


What is the purpose of a clock spring?

A clock spring is a special rotary electrical connector which allows a vehicle's steering wheel to turn while making an electrical connection between the steering wheel airbag. It is located between the steering wheel and the steering column.


Where is the airbag alert in a 1992 Ford F-150?

my 1992 ford f150 custom with l6 4.9L engine is not equipped with airbags on the passenger side or in the steering wheel ...you will need to look for a stamp on the steering wheel that says SRS Airbag... if it doesnt have that stamp your truck is not equpped with airbags.. or you can pull the cover off of your steering wheel like I did to fix my horn... that is how I found out my truck is not equipped with SRS Airbags


How do you remove air bag from steering wheel of Montana 2008?

To remove the airbag from the steering wheel of a 2008 Pontiac Montana, first ensure the vehicle is turned off and the battery is disconnected to prevent accidental deployment. Use a Torx screwdriver to remove the screws located on the back of the steering wheel that secure the airbag module. Gently pull the airbag away from the steering wheel, disconnect the wiring harness, and then fully remove the airbag. Always consult a professional or refer to the vehicle's service manual for specific instructions and safety precautions.