If the 11th digit in the VIN number is D,that means it's got the MODULAR clutch type.
It's quite different than the normal type, and includes the flywheel, disc & pressure plate all riveted together.
I don't believe either Mitchell or Alldata have ANY idea how to go the job, modular or not, so their flat rate times are more than a bit off: and way too low.
Mitchell and Alldata are the main providers of flat rate time for auto repairs.
I have only seen the replacement procedures from Alldata, and they are unusually short and curt: one half page for the whole thing. Whereas most of their instructions are 3 to 10 pages.
This procedure is missing about two thirds of what is required to do the job.
So, you may find problems finding a shop willing to do it.
But advertised rates for this job quote $800 to $1000 for the job.
$ 400.00 dollars
about 20 bucks
Six hours of labor to replace your 1998 Chevrolet Cavalier clutch. The cost will be determined by the labor rate. $75 an hour for labor will cost $450.
It varies with what part of the country you live in. Call a couple of local garages for estimates
not mucha t all like 70 bucks =D
I just paid $400 for upper ball joints on a 2001 dodge ram van. Also had to get $50 alignment. That was at Tire Discounters.
In order to replace a clutch on a Jetta, be prepared to pay at least $450.00 if you're getting it done professionally. It is much cheaper if you do it yourself.
Parts and labor around $750.00 dollars..............
$126 for the whole clutch kit. Clutch,pressure plate,and throwout bearing.
How much should it cost to replace the airbags on a 1997 dodge stratus?
Kwik Fit (Sheffield) quoted around £210. I phoned around and got one fitted for £200.
It depends, but usually about $1,000.