Turn on the key....don't start the car. Push the gas pedal to the floor and release 3 times. Should be reset now.
To reset the oil change indicator light on a 2008 Mercedes S550, turn the ignition on without starting the engine. Press the gas pedal three times within five seconds. After that, the oil change indicator light should turn off, confirming that the reset was successful. Finally, turn off the ignition and start the engine to ensure the light remains off.
Exactly the same as the 2008.
i have a 2009 G6 Pontiac that is stuck in the snow it says engine disbaled ...someone told me that there is a reset switch
To reset the service indicator on a 2008 Mercedes S320, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within 10 seconds. After that, turn the ignition off and then back on to ensure the service indicator has been reset. If the indicator remains, repeat the process.
To reset the service indicator on a 2008 Polo 9N, turn the ignition key to the "On" position without starting the engine. Press the accelerator pedal three times within 10 seconds. After this, turn the ignition off and then back on to check if the service indicator has been reset. If the indicator remains, repeat the process.
take a hammer to the light
how do you reset the tire pressure monitor for the g6 2008
turn the key on, engine off, press the gas pedal to the floor three times. cycle key
normally disconnecting one of your battery terminals and reconnecting it will reset the trouble light.
this information is in your owners manual. please read it.
how to reset a tire sensor for a 2008 Honda civic si
Keep pressing the reset button until you see the Oil life % on the display. Once you have that, then hold the reset button in until the display flashes. Let go for a second and then press and hold the reset button again until the display changes to 100%.