You can calibrate your seat 12 Caterpillar diesel engine by adjusting the fuel valves. You will also need to adjust the fuel injectors.
he purpose of the fuel system is to supply the right amount of fuel for the engine to burn, and control the speed of the engine.
The exhaust system will change the air flow to the engine so the power commander is needed to re-map or calibrate the system again so that it is optimized. If you don't re-map the system then you will not get the full benefits of the exhaust.
Engine System
It is a part of a fuel system that injects fuel into the manifold or into the cylinder of an engine.
An automobile works by converting fuel into energy through a combustion process in the engine. The key components involved in its operation include the engine, transmission, fuel system, electrical system, and cooling system. The engine generates power, the transmission transfers power to the wheels, the fuel system delivers fuel to the engine, the electrical system powers the vehicle's electronics, and the cooling system regulates the engine's temperature.
The fuel system on a Briggs and Stratton engine works by fuel being gravity feed from the fuel tank. Fuel goes to the carburetor where air and gas the mix, after the air and fuel mix it is feed into the engine where the engine goes through the four strokes.
If you are looking for an inertia/reset switch, the answer is no. The engine computer controls the fuel system with relays.If you are looking for an inertia/reset switch, the answer is no. The engine computer controls the fuel system with relays.
To supply air to each cylinder on a fuel injected engine and to supply fuel/air on a carbureted engine.
Air can be bland from the diesel fuel system on a Isuzu D-Max 3.0 engine by hooking an air compressor to the fuel line. Loosen the fuel line at the other end of the engine. The air will be removed.
Fuel pump
engine cleaner and dry gas in fuel tank