0
R-123 is considered a high-pressure refrigerant compared to many other refrigerants. It operates at higher pressures in both the vapor and liquid phases, which can affect system design and component selection. However, it is important to note that its pressure characteristics are still within the range of typical refrigerants used in commercial applications.
What else can I help you with?
An example of an HCFC refrigerant is?
R22 r123
How do you change high temperature refrigerant and high pressure refrigerant in to low temperature refrigerant and low pressure refrigerant?
You cool it and run it through a metering devise.
Which refrigerant is considered high or very high pressure refrigerant?
r 134-a
When refrigerant leave a compressor is high or low pressure?
When refrigerant leaves a compressor, it is at high pressure and high temperature. The compressor raises the refrigerant's pressure as it compresses the gas, preparing it for the next stage of the refrigeration cycle. This high-pressure refrigerant then moves to the condenser, where it releases heat and changes state.
What happens when refrigerant enters the condenser?
what happens when refrigerant enters the condenser
How much does a gallon on r123 rerfigerant weigh?
The weight of one gallon of R134a refrigerant, also known as norflurane, is 4.5713 kilograms. This is equal to 4,571.3 grams or 10 pounds 1.25 ounces.
Does refrigerant exit the compressor as a high temperature high pressure liquid?
No , a high temperature high pressure ( gas )
What does the condenser do in a refrigeration or air conditioning system?
It passes heat out of the high pressure high temp vaporized refrigerant so the it becomes a high pressure lower temperature liquid.It passes heat out of the high pressure high temp vaporized refrigerant so the it becomes a high pressure lower temperature liquid.
What changes of state occur in a refrigerant of a refrigerator?
In a refrigerator, a refrigerant undergoes two main changes of state: from a low-pressure gas to a high-pressure gas in the compressor, and then from a high-pressure gas to a high-pressure liquid in the condenser. This process allows the refrigerant to absorb heat from the interior of the refrigerator and release it outside.
What does AC compressor do?
Cycles refrigerant through the system and changes the state of the refrigerant from a low pressure vapor to a high pressure vapor.
What is a brief description of the basic refrigeration cycle?
Starting at the compressor;Low pressure vapor refrigerant is compressed and discharged out of the compressor.The refrigerant at this point is a high temperature, high pressure, superheated vapor.The high pressure refrigerant flows to the condenser by way of the "Discharge Line".The condenser changes the high pressure refrigerant from a high temperature vapor to a low temperature liquid and leaves through the "Liquid Line".The high pressure refrigerant then flows through a filter dryer to the Thermal Expansion valve or TXV.The TXV meters the correct amount of liquid refrigerant into the evaporator.As the TXV meters the refrigerant, the high pressure liquid changes to a low pressure, low temperature, saturated vapor.This saturated vapor enters the evaporator and is changed to a low pressure dry vapor.The low pressure dry vapor is then returned to the compressor in the "Suction line".The cycle then starts over.
What is the normal pressure high and low for a roof top unit?
The refrigerant pressures are dependent on the type of refrigerant.
