Actually,,,, if u do your own oil changes, u can see the reserve tank right beside the main drain plug,,, hope this helps!
It is located under the coolant reservoir. You can't just replace the sensor. The whole coolant reservoir must be replace. It's a simply 10 minute job.
Under the right side of the false tank there should be a reservoir you can add coolant to that is connected to the radiator.
Under the coolant reservoir near the battery.
Under, in, or near the coolant reservoir.
Coolant is added to the plastic reservoir under the hood.
The coolant level sensor on a 2.4 L is under front of the coolant reservoir towards the engine. It has a 2-wire connector on it.
Coolant is typically found in the radiator or coolant reservoir under the hood of a vehicle. The radiator is usually located at the front of the engine compartment, while the coolant reservoir is often a translucent plastic tank situated nearby. In some vehicles, the coolant can also circulate through hoses connected to the engine and radiator. Always ensure the engine is cool before checking or adding coolant to avoid burns.
that would be in the overflow reservoir follow the hose under the rad cap and you will see it
Right side of engine compartment when looking under hood just left of coolant reservoir.
IF you're asking where the coolant level sensor is located, it is located inside the coolant reservoir (that plastic tank on the passenger's side under the hood). The electrical connection is toward the front of the reservior on the engine side.
It should be located under the hood, on the firewall, drivers side, near the brake fluid reseroir.
If you are talking about the coolant temperature switch that turns the fan on when the coolant reaches the right temperature, then mine it is located in the bottom of the radiator directly under the fan.