0
To remove the front hub on a 1996 Dodge 3500 4x4, start by lifting the vehicle and securing it on jack stands. Remove the wheel and tire, then take off the brake caliper and rotor to access the hub assembly. Unbolt the hub from the steering knuckle, typically requiring a socket or impact wrench, and disconnect any ABS sensor wiring if present. Finally, gently tap or pull the hub off the spindle to complete the removal.
What else can I help you with?
How do you change front universal joints in 2004 3500 dodge?
You need to get a manual that explains this procedure. This is a complex operation that can't be adequately explained here.
Why are you getting water in the fuel filter on a 1996 dodge ram 3500 diesel?
If you are getting water in the fuel filter, it is coming from your fuel tank. You will need to remove and clean the tank.
Is a 1995 Dodge Ram 3500 power front Driver seat track interchangeable with any other vehicle I need a seat track for my Dodge I can't find one?
only with 94 and 95 model trucks
Does a 2003 Dodge Ram 3500 5.9l need a cat?
Yes.Yes.
How do you access cabin air filter on 1996 dodge ram 3500?
To access the cabin air filter on a 1996 Dodge Ram 3500, you will typically need to remove the glove compartment. Start by opening the glove box and removing any contents. Then, locate the screws or clips securing the glove compartment and take them out to lower it. The cabin air filter is usually located behind the glove compartment, allowing you to slide it out for replacement.
What size socket do you need to remove front axle nut on 1996 dodge ram 2500 4x4?
1 11/16 inch
Adjust headlights on 2004 dodge?
what would the measurements need to set a headlight on a 2004 Dodge 3500. Truck facing a garage door
Does a Dana 60 axle fit on dodge?
yes it does...they came stock on 2500 and 3500 rams, 4wd...for example, my dodge is a 01 2500 diesel, has a Dana 60 front and a Dana 70 rear...if it will fit on a 1500, well it can, but it will need modification most likely.
What size batteries do you need for a 2003 dodge ram 3500?
Group 65Group 65
Why 2000 3500 dodge van wont shift properly?
First step is to check the fluid level. If the problem is from 1st to 2nd, the front band has failed or needs adjusted. If the problem is 2nd to 3rd, the front clutch seals have failed and will need overhauled.
Does a 1996 dodge Dakota truck require front wheel and rear wheel alignment?
yes all cars and trucks need to get aligned at some point
Why does your 2002 dodge ram 1500 misfire between 2500 and 3500 rpm?
you need new plug wires
