Physically has a turning problem ? Try your spare key and still has the problem? Replace the ignition switch.
Try turning the steering wheel back and forth while turning the key.
my 83 jeep wagoneer with a 360 engine my ignition switch does'nt start my jeep i have replaced coil and starter ,when i jump the coil it starts
To set the minutes on a 2007 Jeep Compass, start by turning on the ignition without starting the engine. Press the "Menu" button on the radio or dashboard display to access the settings. Use the tuning knob or buttons to navigate to the clock settings, then adjust the minutes by turning the knob or pressing the appropriate buttons. Once set, confirm the changes, and the time will be updated.
1993 Jeep Cherokee Ignition Wiring ...
To reset the warning lights on a 2005 Jeep Grand Cherokee, start by turning the ignition key to the "On" position without starting the engine. Then, press the gas pedal three times within ten seconds. After that, turn the ignition off and then restart the engine; the warning lights should be reset. If the lights remain on, it may indicate an underlying issue that needs to be addressed.
i have the same problem, when i turn off the ignition and restart some times the problem is fixed
The most common electrical problem with a 1985 Jeep Wagoneer when it won't start is often related to the ignition system. Issues such as a faulty ignition switch, a dead battery, or corroded battery terminals can prevent the vehicle from starting. Additionally, problems with the starter motor or its relay may also contribute to the no-start condition. It's advisable to check these components systematically to diagnose the issue.
Sounds like it could be an ignition switch or a starter. Try cleaning your battery terminals first
The 2011 Jeep Wrangler's turning circle is 34.9 ft.
The 2008 Jeep Wrangler's turning circle is 34.9 ft..
The 2013 Jeep Wrangler's turning circle is 34.9 ft..
The 2013 Jeep Patriot's turning circle is 35.6 ft..