my 83 Jeep wagoneer with a 360 engine my ignition switch does'nt start my jeep i have replaced coil and starter ,when i jump the coil it starts
there is one in the back of the haynes repair manual.
in the middle towards the back. my 88 has a yellow dipstick.
on the 89 jeep grand wagoneer there is a lever on the pasanger side between the seat back and the wheel well. The lever is a flat piece of metal that you pull forward to release the lock. the back will fold down and the whole seat tips forward. I hope this helps
Yes you can because we have an 87 with a factory manual window.
Follow the upper radiator back to the engine. The hose is attached to the thermostat housing on the engine side.
Go to your local Parts store and ask for a back flush kit and chemical flush. Follow the directions on each.
i think , look under the hood on, drvers side upper firewall,at back of engine area im pulling motor on a 90 grand wagoneer and i saw one there
try unscrewing the back light covers and replacing the lights
It should say TAIL for taillights or maybe brake lights.
Your Electronic Ignition Switch is bad. It is located on the inside of the jeep under your steering column.
Not in the state of ky. I'm getting ready to do it this week.
Try turning the steering wheel back and forth while turning the key.