Under the right "shelter"(false tank cover)is the reservoir tank and radiator cap.
Take radiator cap off, fill radiator with coolant, put cap back on!
To fill the radiator in a 2005 Chevy Cobalt, first ensure the engine is cool, then locate the coolant reservoir and the radiator cap. Remove the radiator cap and, if necessary, the reservoir cap, and pour a 50/50 mix of coolant and water directly into the radiator until it's full. Replace the radiator cap securely, then check the coolant level in the reservoir and add more if needed. Always check for leaks after refilling and run the engine to circulate the coolant, topping off as necessary.
On the radiator.
The thermostat on a 2005 Honda Element is located near the radiator where the hose meets the engine block. The cap and thermostat is all one piece.
Yes it is the cap on the plastic radiator fill tank
There is no radiator cap, you must fill through the coolant reservoir.
Let the engine cool and press down and twist the radiator cap to the left to remove it. Fill the radiator to the top and reinstall the cap. Check the coolant level in the overflow reservior and fill it to the fill line.
The radiator fluid filler cap is located on the right side of the bike, behind the plastic neck trim in front of the fuel tank.
No, it has no cap on radiator. You fill radiator thru the reservoir cap on the rt side of engine. Hope this helps.
You fill it though the resivoir cap
The radiator overfill tank is the only spot to fill the radiator. There is no fill cap on the radiator itself.