0
What else can I help you with?
Should you buy a 1300cc engine Toyota belta or 1000cc?
yes i should buy
How can I effectively clean and maintain a power washer carburetor for optimal performance?
To effectively clean and maintain a power washer carburetor for optimal performance, you should first disconnect the spark plug and drain the fuel. Then, remove the carburetor and clean it with carburetor cleaner and a brush. Check for any clogs or damage, and replace any worn-out parts if necessary. Reassemble the carburetor and reinstall it, making sure all connections are secure. Finally, test the power washer to ensure it is running smoothly. Regular maintenance and cleaning will help keep your power washer in top condition.
Why carburetor is made of metals?
Because the engine is placed on the carburetor body and the engine is warm. The carburetor should be in the metal to be melted.
Should the carby on a 1990 golf move when you apply sideways pressure to it?
What is a carby??? If you mean carburetor then the answer is no. The carburetor body should not move.
How do you convert a 1990 Chevy Caprice Classic to a carburetor.?
I will assume that the car is fuel injected/computer controlled carburetor. You will have to replace the intake, the carburetor and the distributor. These parts can be found at your local junk yard. Care should be taken when selecting these parts, that they are taken from a non-computer controlled chevy. If not available, these parts can be purchased from a performance parts dealer, i.e. eldelbrock, MSD.
What is the set up for a McCulloch MT270 carb pipes?
The McCulloch MT270 carburetor setup typically involves ensuring that the carburetor is properly mounted to the engine and connected to the air filter and fuel lines. The intake manifold should be tightly secured, and the throttle linkage must be adjusted for smooth operation. Additionally, the fuel line should be free of kinks, and the fuel filter should be clean to ensure optimal performance. It's also important to check for any air leaks around the carburetor gasket.
What kind of adjustment should be performed if the carburetor crankcase cover or oil sump are removed and reinstalled?
If the carburetor crankcase cover or oil sump is removed and reinstalled, it is essential to perform a thorough inspection and adjustment of the carburetor's float level and mixture settings to ensure proper fuel delivery. Additionally, the engine's oil level should be checked and adjusted as needed, and any gaskets or seals should be replaced to prevent leaks. Finally, it may be necessary to recheck the engine timing to ensure optimal performance.
What are the Daewoo lanos 1.6 16valve valve settings?
valves do retreat into heads that is why a clearance should be just cqause a gap wont show it still needs it
How do you clean the carburetor in a 97 jeep Cherokee Laredo?
It doesnt have carburetor it have injectors u should check the fuel filter
Where can you find a carburetor diagram for a 1987 Toyota corolla?
A person should have a diagram when they are working on a carburetor of any car. A diagram for the 1987 Toyota Corolla carburetor can be found in the maintenance manual and the repair manual.
Locate Kill Switch VTX 1300cc Honda?
There should be a run/off switch on the throttle side near your thumb. It may not be labeled, it might be chrome to match the casing.
Is mixture screw turned in or out to lean carburetor?
To lean the carburetor, you should turn the mixture screw in (clockwise). This reduces the amount of fuel entering the mixture, resulting in a leaner fuel-to-air ratio. Conversely, turning the screw out (counterclockwise) will enrich the mixture by allowing more fuel to flow. Always make adjustments gradually and monitor engine performance.
