yes it will you would use the intake and carb and you would loose the fuel injection un less you swap heads
about 150hp. same as an '88 town car i had. you can get the mustang heads and swap them out to get about 225hp or so about 150hp. same as an '88 town car i had. you can get the mustang heads and swap them out to get about 225hp or so
thier the same block and heads just different bore and stroke.
You have to have the computer for the throttle body carb and the fuel pump to match it good luck
the block & heads are the same you just have to pull the 305 out & put the 350 back in
Yes they are the same block and heads you might have to swap intakes though
it is a fairly simple swap motor mounts should be the same you can use the same tranny if you like or not mounts are the same
there is no adapter. vortec heads were cut at a diffrent slope than standard sbc heads. you can swap the heads on the 78 350 for vortech heads or get a multipoint fuel injection intake for a 85 - 95 350. you can get the intake from summitracing.com You will have to swap the heads and the intake
Its a Fly
Not hard same block just have to have a 1987 or new heads
No, and you don't need to swap carburetors either. The carburetor may need readjusting for the elevation of whatever country you are moving too, but you do not need to swap it out.
you would have to change the heads and timing cover no you dont have to swap heads or timing cover! it is a direct swap! motor has been in the lumina for about a month now its running great!