0
What else can I help you with?
Converting a 305 with a carb to a 305 with fuel injection?
you will need to swap intakes too. or i think someone might make adapter plates for the throttle body but im not sure.
Can you Swap throttle body for a carb on 4.3 V6?
Edelbrock makes a manifold for the 4.3. I'm running a 500cfm performer carburetor on my '31 Ford Pickup with 4.3.
What do you need to swap a 350 Chevy engine into a1988 Chevy pick-up with a 305 Chevy engine?
As long as the 350 is a fuel injected engine / TBI / Throttle Body Injection engine there is NO difference.
Would the motor from a 1995 Plymouth acclaim 2.5 fit in a 1986 dodge Aries 2.5?
Depends on the fuel injection system. If they are both throttle body it should work, but you might have to swap the ECM.
How do you swap from fuel injection to carb on a 88 Camaro?
Change the intake manifold and fuel pump. Install the carb, and you're done. I'd recommend against the swap if there isn't anything seriously wrong with the fuel injection though. Electronic fuel injection (especially port injection like the 88 Camaro has) is superior to carburetors in every conceivable way. Better performance, better mileage, etc. If you are building up the engine, you would be better off remapping the fuel table of the EFI to match what you have done to the engine than you would be bolting a carb on it.
Will the motor out of a 1996 chevey s10 fit in a 1995 Chevy s10?
Assuming we are talking about a 4.3L engine, the 96 would be CFI (Central Fuel Injection) and the 95 would be TBI (Throttle Body Injection). The engine would bolt in but all the electronics including the fuel pump and fuel lines would also have to be swapped, or swap the 95 throttle body unit over to the 96 engine.
Swap Nissan V6 3.0 throttle body to Fuel injected?
Swapping a Nissan V6 3.0 throttle body to a fuel-injected system typically involves replacing the carbureted throttle body with a compatible fuel-injection throttle body designed for the engine. This process requires the installation of fuel injectors, a new fuel rail, and possibly an updated engine management system to ensure proper fuel delivery and tuning. Additionally, modifications to the intake manifold and vacuum lines may be necessary to accommodate the new setup. Proper tuning is crucial to optimize performance and ensure reliability after the swap.
Can you swap a carburetor for throttle body on a inline 6 Chevrolet?
It's possible, but not a bolt-on.
Can you swap a 98 Chevy vortec into a 93 Chevy pickup?
yes but the cpi injection in 1998 is way different than chevy's 1993 throttle body system so the whole computer system must be adapted or swapped and the heads are different so you cannot just swap the intakes.
Guide on how to swap bike carbohydrates on a civic dx single carb?
you don't. that's not a carb on your car. you have electronic fuel injection. theres one primary injector and another auxilliary injector. its referred to as DPFI (dual point fuel injection). what is quite commonly done is people swap the dpfi manifold for a mpfi (multi point fuel injection) manifold which has 4 equal sized injectors. search for "dpfi to mpfi" and you'll find more than enough information to completet this swap. it will make a quite noticeable power increase.
Will a 1980 305 engine work in a 1992 truck?
yes it will you would use the intake and carb and you would loose the fuel injection un less you swap heads
Will 1993 Chevy suburban engine and transmit ion work in a 1995 Chevy pick up?
Yes But they have different plug ins on the throttle body so you will have to you will have to swap the throttle body also
