Outside at the condenser.
You can fill the AC on the low pressure side of the AC unit. Make sure and only use R12 unless your system has been converted to R134A.
you need to get your ac filled again cost about 60 bucks you need to fill it every 3 or more years.
To fill an AC system with freon, you will need to locate the low-pressure port on the system, connect the freon canister to the port, and slowly release the freon into the system while the AC is running. It is important to follow the manufacturer's instructions and safety guidelines when handling freon.
Connect a gauge and freon can to the low side port of the ac system. Start the car and turn ac on high. Fill freon till the gauge shows full.
How deep is the 'ac' Because 'tonnage' has a volume, which you have NOT indicated, by quoting only the AREA.
Left side under hood.
3.00 lbs
usually right on or near accumulator
There are ways to fill gas in split air conditioners. If someone attempts this themselves, there can be a gas leak. It is best to hire a professional to do this.
Using a gauge and the proper type of freon, connect to the low side ac gauge. With the ac on high and the engine running fill the system to the full mark on the gauge.
his name is fill rudd and he was the only druumer for ac dc
That 35 Ford must be custom built with after market AC. An AC mechanic with the proper tools and equipment can fill that system.