0
What else can I help you with?
What do you have to do to use the heads from a 1983 Chevy 350 on your 1987 Chevy 350?
nothing. but the intake will be diff.
Will heads off a 305 or 283 fit a 350 Chevy?
As long as the 350 is older then a 1987, you will have no problems. They will bolt right on with no modifying.
What is the torque for the dome and heads for a 1987 chev 350 pickup?
Torque for the dome???????????????????????? What the heck is a dome?????????
What should the cylinder heads of a 1991 Chevy 350 be torqued at?
65 lb/ft. There is also a sequence to follow. I suggest you take a look at this: http://www.boxwrench.net/specs/chevy_sb.htm
Will cylinder heads with the cast number 471513 which are off of a 1979 267-350 work on a 1987 350?
Yes it will work the block bolt patteren never changes from 350 to 350. You might run into a problem with a intake manifold not going on though unless you have it too for the heads you want to use.
How do you change the heads on Chevrolet 350 engine is there a certain torque needed?
Most definitely they must be torqued correctly. Torque in a cris-cross pattern slowly reaching the torque setting. For all specs click the link.
Will the cylinder heads from a 1986 Chevy 350 work for a 1987 Chevy 350?
Answer The 86 Chevy block and the 87 Chevy block are the exact same block, nothing changed, it will fit perfectly.yes
How do you repair the heads on a 1987 vw vanagon?
To repair the heads on a 1987 VW Vanagon, first, remove the engine from the vehicle, then detach the cylinder heads by unbolting them from the engine block. Inspect the heads for cracks or warping, and if necessary, have them machined at a machine shop for flatness. Replace the head gasket, reassemble the heads onto the engine, and ensure all bolts are torqued to the manufacturer's specifications before reinstalling the engine in the Vanagon. Always consult a repair manual for specific torque settings and procedures.
Do the 305 vortec and 350 vortec have the same heads?
No. The 350 has bigger valves. While you CAN put the 305 heads on the 350, (I can't imagine why you would actually want to) you can NOT put the 350 heads on the 305. Because of the 305's small bore, the valves on the 350 heads will hit the cylinder block.
Can you change the heads off a 1989 350 and put them on a 1979 350?
no you cannot they are not interchangeable the 89 heads are fuel injected heads and the 79 are carb heads and will not interchange
Will 350 heads on a 305?
Not a good idea. 350 heads will lower compression to 7 to 1 or less.
What causes looes heads 1974 volkswagen?
Not being torqued in the right sequence when the engine was serviced.
