0
What are the torque specifications for the head bolts on a 1998 Cadillac Catera V6?
someone had wrote this as an answer to this question and after working on a catera i will say it takes a skill level that most back yard mechanics only wish they had I do not recommend replacing head gaskets on this car even if you have done several head jobs in the past. i run a car lot and I am a skilled mechanic and I will just say I will never do another head job on a catera but if you have already pulled the motor apart before you have read this here is the torque specs for you and good luck i hope you know what you are doing
Cylinder head bolt:
- step 1 - 18ft lbs
- step 2 - additional 90 degrees
- step 3 - additional 90 degrees
- step 4 - additional 90 degrees
- step 5 - additional 15 degrees
What else can I help you with?
Torque specifications bolts suzuki esteem?
torque specifications
What are the specific torque specifications for the m5 bike bolts?
The specific torque specifications for the m5 bike bolts are typically between 5-7 Nm.
What size are the bolts that hold on the calipers on a 1999 Cadillac Catera?
The bolts that hold the caliper in place on a 1997 Catera are 3/4 inch. The bolts that hold the caliper together are 7/16 inch. Probably the same hardware.
What is the torque sequence of your head bolts for a Cadillac 4.5 engine?
The torque specs for a Cadillac depend on which engine it has. For most 425, 572, 368, and 500 engines, the torque for the head bolts is 115 ft. pounds. The torque for the cam bolts is 25 ft. pounds, and the torque for the valve covers is 10 ft. pounds.
What is the torque spec for a 1995 Cadillac 4.9 liter rocker arms?
torque specs on the bolts that hold the rockers on a 4.9 cadillac motor
Torque specification for 98 Ford F-150?
what is the torque specifications for the intake bolts on a ford 4.2L?
What are the torque specifications for head bolts on a 1997 Chevy silverado?
65ft. LBS
Cylinder head bolt torque specs for 2000 Cadillac catera 3.0L 6 cylinder?
You need new head bolts old head bolts been stretched. You have torque head bolts in five passes. First pass torque head bolts 18 ft lbs. Second pass add additional 90 degrees.third pass add additional 90 degrees.fourth pass add additional 90 degrees.fifth pass add 15 degrees.
What is torque setting for water pump bolts?
torque setting for 91 cadillac water pump 4.9 engine?
Cranking torque for starter?
In general starters do not have torque specifications. You will want to tighten the starter as tight as you can without breaking the starter bolts.
What is the torque specifications on a ktm 125 head?
on my '03' 125SX the head bolts should be 18nm.
What is the torque specifications for the water pump attaching bolts on a 2005 Jeep Grand Cherokee 5.7L HEMI?
What is the torque specifications for the water pump attaching bolts on a 2009 Jeep Grand Cherokee 5.7L HEMI?
