0
What else can I help you with?
What are main journal torque specs for a ka24de?
34-38 lbs/ft
Head bolt torque specs for 1978 gl1000?
According to the GL-1000 shop manual Cylinder head bold torque is 38-41 ft-lbs.
What is the torgue spec for a 2003 Chevy s10 4x4 wheel bearing?
The torque specs for a 2003 Chevy S10 4x4 wheel bearing is 28 ft. lbs. This is equal to 38 N.m.
What are the torque specs for rod and main bolts for 02 civic ex 1.7?
The rod is 24 foot pounds and the main is two steps 18 foot pounds then 38 foot pounds
Where can I find Specs on a Colt 38 NP?
Are you looking for specs on the cartridge itself or a firearm for which it was chambered? To make your search easier, the .38 Colt New Police is the same as the .38 S&W cartridge. Not that this is not the same cartridge as the .38 S&W Special as they are totally different.
What are the specs of a Stihl 011AVT chainsaw?
011 specs are. engine is 41 cm3 or 2.50 cubic in,bore 38 mm or 1.50 in.,Stroke 36 mm or 1.42 in,9800 max rpm.Max torque 1.8 Nm or 1.3 ft pounds at 4500.For some odd reason they dont give me any Hp specs.Maybe they didn't want to scare anyone.It might be one of those Huge Competition chainsaws.
How DO YOU change a driver side door handle on a 1998 Pontiac Bonneville?
you get a 38 rench then get a 4 9 rench
What is the cylinder head torque on a 1999 Toyota Tacoma 2.7 liter engine?
from a Toyota techfrom a Toyota tech. torque with torque wrench to 38 ft/lbs. then mark bolts with white paint like white out and turn additional 90 degrees. then another 90 degrees
What are the rod tork specs on a 96 Chevy 350?
11/32 Connecting Rod 38-44 3/8 Connecting Rod 40-45
What kind of gas mileage does a 1991 Pontiac Lemans get?
Manual: 29 mpg / 38 mpg Automatic: : 27 mpg / 33 mpg
What are the head bolt specs for 93 38 mercury cougar?
Torque Sequence 1993 3.8 Cougar; Looking at Engine from front of car the lower bolts are 7 3 1 5 upper bolts are 8 4 2 6. Step 1; Torque in Sequence to 37 FT./ LBS Step 2;Torque in Seq. To 45 FT./LBS. Step 3; Torque in Seq. To 52 FT,/LBS. Step4; Torque in Seq. To 59 FT./LBS. Step 5; Back off all bolts in Torque Sequence 2-3 turns. Step 6; Retorque all Bolts in Sequence 11-18 FT/LBS. Step7; Rotate Long Bolts 85-105 Degrees, Short Bolts 65-85 Degrees in Sequence. Recheck final Torque in Sequence. When replacing Head Gasket Besure To Replace all Head Bolts. Hope I Have Helped -u-. "Odie" OdiebuiltMC@aol.com
Ford 7.3 diesel connecting rod bolt torque?
Torque setting for 7.3/6.9 IDI Diesel Connecting Rod Bolts Stage 1 - 38 ft/lbs Stage 2 - 51 ft/lbs Head Bolt torque is in stages, snug/60/90/110 ft/lbs.
