Ignition knock, also known as engine knock or detonation, occurs when the air-fuel mixture in an engine's cylinder ignites prematurely or unevenly. This can be caused by factors such as using low-octane fuel, excessive engine heat, incorrect ignition timing, or carbon deposits in the combustion chamber that create hot spots. The resulting uneven combustion can lead to a knocking or pinging sound and can damage engine components over time. To prevent ignition knock, it's important to use the appropriate fuel and maintain the engine properly.
Well, it like this. If the knock sensor is bad and the ignition system does not know this, it will destroy the engine, that all.
what causes the knock sensor code on a 2002 Kia Spectra. Thank You sreddish@neo.rr.com
Spark plug knock on a 1998 Chevrolet pickup is an indicator that the ignition timing is correct. By adjusting the timing, the knock can be eliminated.
knocking as in spark knock? or engine knock? spark knock is adjusted through a knock sensor via ignition timing. eng. knock is due to brg. knock as in low oil pressure or sluge in engine or just a tired motor
because their is no doorbell
You being a pervert.
the knock sensor monitors preignition,spark knock and sends signal to pcm,pcm responds by adjusting ignition timing and fuel timing until knock is gone.
Code P0325 in a Nissan Quest indicates a problem with the knock sensor circuit, specifically related to the knock sensor's performance or voltage. This can be caused by a faulty knock sensor, damaged wiring or connectors in the circuit, or issues with the engine control unit (ECU). The knock sensor is responsible for detecting engine knock or pre-ignition, and if it fails, it can affect engine performance and efficiency. Diagnosing the issue often requires checking the sensor, wiring, and connectors for faults.
It signals the computer to reduce the ignition timing.
test ignition coil,ignition module,pick-up coil,electronic spark control,and knock sensor
It reads the vibrations that result from the ignition of the air fuel mixture in the engine. The computer uses that information to calculate proper ignition timing.
And engine knock is normally caused but I worn crankshaft bearing or rod bearing.