A machine shop. This cannot be done with any success at home.(Unless of course you have a machine shop in your garage.)
It will be close to 315 ci.keep in mind that a 350 is not really 350 but 349.xx or look at this way, for every 030 over in bore = 5 ci.
You can't. yes you can, but you need to bore the block 40 over and put a 375 stroke(400) crank with 6 inch rods. Alote of money and time at the machine shop!!
You need a mike unless you are sure it's never been rebuilt. Standard is 4.00 on 350 but it could be 30/40/60 over. A machine shop could tell you.
350 divided by 40 is 8.75
i have a 350 bored 40 over and 400 crank, and been told its a 383 stroker, what is it?
What the house power on a 350 bored 40 over rated at
I have a 84 350 CSB and a tunnel ram with 2 4 barrels plus a 671 blower. what do I need to do to the block
357
358
40% of 350 = 350*40/100 = 140
40 x 350 = 14000 40% x 350 = 140
Up to 60 over but I personally wouldn't go past 40 if u plan to run any kind of horse power. Make sure u can buy 60 over pistons before any bore is done