Varies by vehicle and engine, as well as diagnostics... I'm guessing you have a code P0010, P0011, or both... it doesn't necessarily mean the problem is in the camshaft sensor... very often, it'll be the wiring or actuator. So your total cost is going to depend on those variables, as well.
It is in the oil pan. Nissan has had a recall to reprogram the sensor. They may have to replace the sensor for free. It cost about $600 for repair.
400 Dollars ..it is located in the same area where the timing chain is..and cover has to come off
A TPS is normally known as a "throttle positioning sensor" price would be dependant on the vehicle.
How much will it cost to replace a cank sensor on a Mazada 626?
$49.99
Your vehicle is under 50K (or higher in some cases,) it is under factory warranty, So that it in and ask for the work
The 2003 Nissan Altima had a recall related to the crankshaft position sensor, which could potentially lead to engine stalling or failure to start. This issue was due to a manufacturing defect that could cause the sensor to malfunction. Nissan notified affected vehicle owners, and dealerships were instructed to inspect and replace the faulty sensors at no cost. If you own a 2003 Altima, it's advisable to check with a local dealership to confirm if your vehicle is affected and to ensure any necessary repairs are completed.
All you need to do is replace the sensor. It cost around $20.
The sensor will cost around $75. It will cost another $75 to have it installed and the ECU reset.
It can cost between $80 and $200 to replace a drive shaft on this vehicle. It will depend on what a shop charges on the part and the labor.
Depends on what car you have, but it will probably cost you about 400$ or more.
14.50 dollars at the dealer