An epoxy is best for this.
I would use a two part epoxy.
If gluing paper to paper, white glue is best.
The best type of glue to use for repairing a broken window glass is a clear silicone adhesive.
Car window tint is applied by spraying a clear, soapy solution with a mild glue added onto your car window, and then the film is cut to the shape of your window and applied. Some window tints have an adhesive backing that is a peel and stick.
you have to cut the window and use glue and duck tape to hold it
Get a hot glue gun, glue the top, then inject hot glue into the bottom inside seam. That will hold, for awhile anyways.
The rear window glass on a Honda Civic is held in place by a silicone sealer. Remove the old glass be prying it away from the car. Clean off any residue of the sealant. Properly line up the window and use the silicone sealer to glue to window to the car.
Rear quarter windows are installed on a car using a special glue. Make sure the mating surface for the window is cleaned, use a silicone sealant to properly lay the window. This will ensure there are no leaks. Install the window.
glue hatch window latch
No, that's not a very smart idea.
To effectively remove glue from a window, you can use a mixture of warm water and dish soap to soften the glue. Gently scrape off the softened glue with a plastic scraper or a razor blade. Be careful not to scratch the window. You can also try using rubbing alcohol or vinegar to dissolve the glue. Remember to test any cleaning solution on a small, inconspicuous area of the window first to ensure it does not damage the surface.
There are glue removers you can buy at stores, or you can use nail polish remover. If you do, use it in a well ventilated area, such as outside or with a window open nearby.