0
For a 3100 V6 engine, it is typically recommended to use 10W-30 engine oil for most driving conditions. In colder climates, you might consider using 5W-30 for better performance during startup. Always check your owner’s manual for specific recommendations and any manufacturer updates.
What else can I help you with?
Where can you find a diagram of a 3100 v6 engine?
www.60degreev6.com
3100 V6 engine has how much horsepower?
160hp
What is the engine oil grade for a 2000 dodge Dakota 3.9 liter v6?
10w3010w30
What is the engine oil capacity for GM 3500 V6?
I BELIEVE it is 4 quarts. Put in 4 quarts, and then check your dipstick. I know 3100's and 3400's are 4.5quarts but the newer engine is different.
What grade oil for v6 vectra?
For a V6 Vectra, it's typically recommended to use 5W-30 or 10W-40 motor oil, depending on the engine's specifications and the climate conditions. Always refer to the owner's manual for specific recommendations, as it may vary based on the year and engine variant. Using the correct oil grade ensures optimal engine performance and longevity.
Does a 97 Pontiac grand am se 3100 V6 have timmin belt or chain?
The GM 3.1 litre V6 engine has a timing CHAIN
Where is oil cooler on gm 3100 sfi v6?
there isn't one unless you put in a aftermarket one
What liter is 3100 sfi v6?
Does the Pontiac 3.1 Liter sfi 3100 V6 have any problems?
How do you remove oil dipstick tube on 1994 Grand Am SE 3100 SFI v6?
To remove an oil dipstick tube on a 1994 Grand Am SE 3100 SFI v6, pull the oil dipstick out of the tube and remove the bolt from the bracket. Slide the base mount bracket up and off the tube.?æ
Where is oil pump on a 3100 v6?
Remove the Oil Pan (tricky but can be done smoothly without removing the passenger side steering, ball joint etc.) On the driver side just follow the pick up tube up. (3100 v6 chevy front wheel 98)
Where is the engine block drain plug located on a 1996 Chevy Beretta Z26 besides just on the bottom?
A 96 Chevy Beretta Z26 has a 3100 V6 engine. The oil drain is located on the bottom of the oil pan, on a slight angle pointing down and towards the rear.
Drain screw nut size oil pan achieva?
15mm on 3100 v6 and also quad 4
