0
What else can I help you with?
Is the car drivable if the transaxle light comes on?
if the transaxle light comes on in the car can you still drive it
Can you still drive your car without a brake light switch?
Yes
If a spotlight is shown onto a still lake describe what happens to the beam of light?
The light if directed in the water will bend.
What cause the all wheel drive light going on and off?
If your talking about it turning on while you are driving, this is normal. All wheel drive is basically 4-wheel drive that only turns on when you need it to. This happens automatically, and that's why your seeing the light turn on and off
What happens if the air filter hose is broken on a Renault scenic year 2000 can you still drive this car?
Yes you can still drive the car, althogh you could end up lossing some power
Can you drive with ABS light on?
Yes, your normal brakes will still work, but the ABS may not function.
How do you reset the gas cap message in the dashboard on a Chrysler Sebring?
Verify that the cap is tight. Drive for a couple of days, and if the light is still on, you have a vapor leak in the fuel system and will need service.Verify that the cap is tight. Drive for a couple of days, and if the light is still on, you have a vapor leak in the fuel system and will need service.
Is it legal to drive with a broken tailight if only the plastic is broken but the light works fine?
yes.. as long as the light still works you sould be fine
Can you still drive your car after the ABS light comes on?
It is highly recommended that you have the car checked as soon as possible. The light comes on to signify a problem with the ABS. However, when the ABS fails the brake system will function just like the pre-ABS equipped vehicles. Yes, you can still drive it.
What happens after you get spark plugs fixed and the check engine light still comes on?
Go to Auto Zone and they will check you engine light for FREE... And go from there...
How do you turn off low tire pressure light on a 2009 Chrysler Sebring?
Air up the tires and drive it. If it is still on, you will need to have the system checked for codes.Air up the tires and drive it. If it is still on, you will need to have the system checked for codes.
What happens of pin 1 on the floppy drive data cable is not aligned with pin 1 on the drive connector?
The floppy drive will not work. Occasionally, an improperly installed cable will damage the drive electronics, but more often, the light on the front of the drive will stay on constantly, to indicate that something is wrong.
