0
With Ford, they began using this form of block casting in the late 1950's. They assigned each decade a letter which begins the casting number. 1950 began the coding with letter 'B'. Each subsequent decade received the following letter. The first number after the first letter is the year of that decade in which the part was modeled for.
This means that your block casting number D8VE-6015-ASA is for a:
D = 1970's
8= 1978
V = the model is a Lincoln
E = the part is an engine component (or, in this case, an engine)
6015 = it is an engine base assembly piece (or, again, the actual engine)
ASA = the engineering version
In conclusion, this casting number tells you that the part (the engine) is for a 1978 Lincoln Mark V continental. The engineering number tells us that it is a Ford 400 cu in, 6.6 L engine.
What else can I help you with?
What ford 5.0 engine do you have casting number E7TE?
That casting was used for all Ford 5.0 from 1987 to 1995.
What is the ford engine out of with casting number 711M6015BA?
capri, cortina, escort
What size engine is casting number E5HN 6015 AE?
Ford 7.8l
Ford engine block 302-casting number D8VE 6015 A3A Z means what?
WHAT YEAR WAS THIS ENGINE BUILT
Ford casting number D2AE-CA?
This casting number is for a 351 Cleveland big block engine from 1972....With Ford, they began using this form of block casting in the late 1950's. They assigned each decade a letter which begins the casting number. 1950 began the coding with letter 'B'. Each subsequent decade received the following letter. The first number after the first letter is the year of that decade in which the part was modeled for.This means that your block casting number D2AE-CA is for a:D = 1970's2 = 1972This piece has a casting number for 1972.The remainder of the casting number tells you about the part number and engineering number...thus it's a 351 Ford Cleveland big block engine designed for a 1972 model.
Where is the ford engine casting number?
The Ford engine casting number is typically located on the engine block, often found on the driver's side, near the top or at the rear. It can also be found on the engine's bell housing or on the cylinder head. The exact location may vary depending on the engine model and year, so consulting a service manual for that specific engine can provide precise guidance.
What engine size does this casting number belong to C6AE 3425G?
The casting number C6AE 3425G is associated with a 390 cubic inch (6.4 L) V8 engine produced by Ford. This engine was commonly used in various Ford vehicles during the 1960s, particularly in models like the Ford Thunderbird and the Ford F-Series trucks. The "C6" prefix indicates it was produced in 1966, and the "AE" designates it as part of Ford's big-block engine family.
Where do you find the casting number on a 1976 ford engine block?
front of block drivers side, below head.
What engine has casting number 89TM 6015 -aa this is for a Ford Bronco 2?
The engine with casting number 89TM 6015-AA is a 5.0L V8 used in various Ford vehicles, including the Ford Bronco II. This engine is part of the Ford Modular engine family and was produced during the late 1980s and early 1990s. It typically features a fuel-injected design and is known for its reliability and performance in off-road applications.
Where is the serial number on a 1965 289 ford engine block?
Casting number is on the back, right hand side of the block just above the starter.
What Ford casting number is this D1VE 601SA2B?
With Ford, they began using this form of block casting in the late 1950's. They assigned each decade a letter which begins the casting number. 1950 began the coding with letter 'B'. Each subsequent decade received the following letter. The first number after the first letter is the year of that decade in which the part was modeled for.This means that your block casting number D1VE 601SA2B is for a:D = 1970's1 = 1971This piece has a casting number for 1971.V = the model is a LincolnE = the part is an engine component6015 = [your 's' is actually a 5] it is an engine base assembly piece (or the actual engine itself)A2B = the engineering versionIn conclusion, this casting number tells you that the part is for the engine of 1 1971 Lincoln Continental Mark III. Probably a 460 cu in, 7.5 L, V8 engine.
What year is casting E5HN6015AC?
The casting E5HN6015AC corresponds to a part used in Ford vehicles, specifically from the mid-1960s. The "E5" in the casting number indicates that it was produced in 1965. This casting is typically associated with components like engine blocks or heads from that era.
