That light comes on when the abs computer detects a malfunction in the electronic stability system and sets a code. You need to have the system tested with a scan tool
That light comes on when the abs computer detects a malfunction and sets a code. You need to have the system tested with a scan tool.
The ABS (anti lock brake) computer has detected a fault in the ESP (electronic skid protection) or BAS (brake assist system). You will need to have the system checked for codes to know possible causes.
The ESP BAS light on the instrument cluster of a 2005 Chrysler 300 indicates a problem with the Electronic Stability Program (ESP) and the Brake Assist System (BAS). This warning can be triggered by issues such as a malfunctioning wheel speed sensor, a problem with the steering angle sensor, or low brake fluid levels. When the light is illuminated, it’s advisable to have the vehicle inspected to ensure safe operation and to address any underlying issues. Ignoring this warning may affect the vehicle's stability and braking performance.
The first step is to have the abs system checked for codes. Those lights stay on when the computer has detected a malfunction. When you know the code, you can test for possible causes.
In most cases it means one of the wheel speed sensors has gone bad and needs to be replaced.
bas esp light
The ESP BAS light in your 2008 Chrysler Pacifica Touring typically indicates an issue with the Electronic Stability Program (ESP) or the Brake Assist System (BAS). Common causes may include a malfunctioning wheel speed sensor, issues with the ABS system, or problems with the steering angle sensor. It's advisable to have the vehicle scanned for diagnostic trouble codes to pinpoint the exact issue and ensure proper repairs are made. Ignoring the light could affect vehicle stability and safety, so addressing it promptly is recommended.
Could be failed brake light switch
center your steering wheel
There is a failure in the electronic stability or brake assist system.
ESP stands for electronic skid protection. This is also run by the ABS computer. The light comes on when the anti skid system is active(when you are sliding), or when the system detects an electrical malfunction.
You have to fix the cause of the code that is set in the ABS module.