"Most of the time when viscosity is explained words are used that are too technical for the average person to quickly grasp. This leaves them still wondering what the viscosity numbers really mean on a bottle of motor oil. Simply put, viscosity is the oil's resistance to flow or, for the layman, an oil's speed of flow as measured through a device known as a viscometer. The thicker (higher viscosity) of an oil, the slower it will flow. You will see oil viscosity measurement in lube articles stated in kinematic (kv) and absolute (cSt) terms. These are translated into the easier to understand SAE viscosity numbers you see on an oil bottle."
Only SAE 30 is equivalent to SAE-30
I just spoke with a technical support rep from Harbor Freight. He said that if is calls for SAE 30W that SAE 30 should be fine.
No ( according to the owners manual that came with my Ariens lawnmower ( with a Kohler engine ) SAE 30 if above 40* Fahrenheit SAE 10W-30 if below 40* Fahrenheit
GM SAE 5w-30 or ACdelco SAE 5w-30
Im not 100% sure but its a call, Yes 2t oil is SAE 30 since its thicker than ATF(SAE 20).
SAE 30 or SAE 10W30.
Yes you can.
SAE 30 motor oil if the temperature is between 30 & 75°F.Colder use SAE 10 oil.Warmer use SAE 40 oil.
sae 30 (above 32 degees) and sae 5w-30 (below 32 degrees)
SAE stands for Supervised Agricultural Experience.
No, SAE 30 and 10W-30 are not the same. SAE 30 is a single-grade oil, meaning it has a consistent viscosity at a specific temperature, typically used in warmer conditions. In contrast, 10W-30 is a multi-grade oil, which means it has a lower viscosity at cold temperatures (the "10W" part) and maintains a viscosity similar to SAE 30 at higher temperatures. This allows 10W-30 to perform better in a wider range of temperatures.
SAE 30 as standard. SAE 10 for cold weather.