The correct spark plug gap for a 2002 Mazda E2000 is typically around 0.8 mm (0.031 inches). However, it's always best to consult the owner's manual or a repair guide specific to your vehicle to confirm this specification, as it can vary based on the engine type or modifications. Ensuring the proper gap is crucial for optimal engine performance and efficiency.
The spark plug gap on a 2002 Mazda 626 should be set at .044 inches. A new spark plug will come preset from the factory.
in the heads
44
car stalled at red light and will not start. there is no spark from spark plug, help!
1.1mm(.044in)
Screwed into the cylinder head.
.44
To replace the spark plugs on a 2002 Mazda MPV, start by locating the spark plug wires and carefully disconnect them. Remove the ignition coils or any covers that may be obstructing access to the spark plugs. Use a spark plug socket and ratchet to unscrew the old plugs, then install the new plugs by hand to avoid cross-threading, followed by tightening them to the manufacturer's specifications. Finally, reconnect the ignition coils and spark plug wires.
4 Spark Plugs are lined in a row at the top of the engine down the middle (Follow the wires on the top!). A basic, NGK BKR6E Spark Plug pack is generally recommended.
Bosch OE fine wire Iridium spark plug gap is preset. Do not gap.Other aftermarket spark plugs range from .040" to .044" gap.
40 to 45. 40 is common.
make sure the gapping on the plug is correct to what the vehicle needs