usually around 1200-1300 rpm
It did when it came from the factory.
A Chevy 305 is not a transmission it is a motor. If you mean a Chevy turbo 350 then the answer would be 3 different forward speeds and reverse.
Yes it had 1 from the factory.
Remove the driveshaft from the back of your Chevy transmission. Remove the transmission mount retaining bolts. Remove the retaining bolts from the Bell housing. The transmission can then slide backwards. Don't forget to unbolt the torque converter from the flex-plate and remove the torque converter with the transmission.
Yes, if it came from the factory with a converter.
looking for diagram of 5.3 liter v8 engine Chevy silverado truck transmission and torque converter?
It takes 12quarts of transmission fluid with torque converter drained.
700R4 from the factory.
It is inside of the transmission.
The front seal on your automatic transmission would be between the torque converter and the front pump of the transmission. The transmission would have to be removed along with the torque converter to replace the seal.
You need to separate engine and transmission. Then torque converter just pulls of tranny.
You will have to remove the transmission and torque converter from the car to get to the front seal.