0
What else can I help you with?
What is the Ignition timing for 1988 Chevy 454 engine?
what is the ignition timing for a 1988 Chevy 454 engine
What is the Ignition Timing setting for a 1974 Chevy 454?
The base ignition timing for a 1974 Chevy 454 engine is between 8 and 12 degrees below top dead center. A timing light is needed to accurate set ignition timing.
What is the ignition timing for a 1980 Chevy 454 big block?
4, to 6 degrees advanced or BTDC.
What is the ignition timing for a 1975 big block Chevy 454?
6, to 8 degrees advanced, or BTDC., will work best.
What is the ignition timing for a 1993 Chevy 454?
1.8.4.3.6.5.7.2 standard Chevy timing/firing order. the #1 on the distributor will be pointing @ the #1 cyl when @ top dead center.( front drivers side.
What are the factory timing specs for 454 engine?
what are the factory timing specs for a 1977 chevy 454
When did Chevy come out with the 454?
1970
What is the ignition timing for a 1977 Chevy 454?
4-degrees BTDC. Before top dead center. The Heavyduty sets at 8-degrees BTDC.
What is the correct ignition timing for a 1985 Chevrolet truck with a 454 cubic inch engine?
18436572 same as all Chevy v-8s that is the firing order, not the ignition timing. timing varies between vehicles. a sticker under hood will give timing info, or a Haynes or Chilton service manual
Will a 396 Chevy and a 454 timing cover enterchange?
Yes.
What plug wire is used for timing 454 Chevy when timing tab is on bottom?
#1
How do you set the timing on a 1990 454 SS Chevy?
To set the timing on a 1990 454 SS Chevy, first ensure the engine is at operating temperature. Then, locate the timing mark on the harmonic balancer and the timing tab. Use a timing light to check the ignition timing while the engine is running; adjust it by loosening the distributor hold-down bolt and rotating the distributor until the desired timing mark aligns with the tab. Finally, tighten the hold-down bolt and recheck the timing to ensure it remains at the correct setting.
